Recently added

Comparison of nonlinear response of gravity cantilever retaining walls and mechanically stabilised earth (MSE) wall structures

Kamalzadeh, Arman; Pender, Michael (2022-05-31)

Key drivers in using low damage seismic designs in Christchurch buildings

Skidmore, Juliet; Granello, Gabriele; Palermo, Alessandro (2022-12-02)

Highlighting the need for multiple loading protocols in bi-directional testing

De Francesco, Giovanni; Sullivan, Timothy; Nievas, Cecilia (2022-05-31)

A method for seismic design of RC frame buildings using fundamental mode and plastic rotation capacity

A.R., Vijayanarayanan; Goswami, Rupen; C. V. R., Murty (2022-05-31)

Seismic zonation and default suites of ground-motion records for time-history analysis in the South Island of New Zealand

Burlotos, Christianos; Walsh, Kevin; Goded, Tatiana; McVerry, Graeme; Brooke, Nicholas; Ingham, Jason (2022-03-01)

System overstrength factor induced by interaction between structural reinforced concrete walls, floors and gravity frames: Analytical formulation

Sedgh, Reza E.; Dhakal, Rajesh P.; Lee, Chin-Long; Carr, Athol (2022-09-01)

Shear wave velocities of prominent geologic formations in the Nelson-Tasman region

Wotherspoon, Liam; Ryder, Rebecca; Stolte, Andrew (2022-03-01)

Hybrid posttensioned rocking (HPR) frame buildings: Low-damage vs low-loss paradox

Dhakal, Rajesh (2021-12-01)

Evidence collected for peer review of buckling-restrained braced frames in New Zealand

Court-Patience, Dan; Garnich, Mark (2021-09-01)

Recycling of damaged RC frames: Replacing crumbled concrete and installing steel haunches below/above the beam at connections

Ahmad, Naveed; Arifullah; Ilyas, Babar; Hussain, Sida (2021-12-01)

Design recommendations to prevent global out-of-plane instability of rectangular reinforced concrete ductile walls

Dashti, Farhad; Dhakal, Rajesh; Pampanin, Stefano (2021-09-01)

Designing and detailing transverse reinforcement to control bar buckling in rectangular RC walls

Tripathi, Mayank; Dhakal, Rajesh (2021-09-01)

Investigation of construction material quality and workmanship defects of RC buildings collapsed and severely damaged in the 6.8 Mw Sivrice, Elazığ, Turkey earthquake, January 2020

Bikçe, Murat; Erdem, M. Musab (2021-09-01)

Theoretical and experimental evaluation of timber-framed partitions under lateral drift

Bhatta, Jitendra; Mulligan, Joshua; Dhakal, Rajesh P.; Sullivan, Timothy J.; Gerlich, Hans; Kang, Frank (2021-12-01)

The oscillation resistance ratio (ORR) for understanding inelastic response

Soleimankhani, Hossein; MacRae, Greg; Sullivan, Tim (2021-12-01)

Seismic design of acceleration-sensitive non-structural elements in New Zealand: State-of-practice and recommended changes

Rashid, Muhammad; Dhakal, Rajesh; Sullivan, Timothy (2021-12-01)

To cordon or not to cordon: The inherent complexities of post-earthquake cordoning learned from Christchurch and Wellington experiences

Shrestha, Shakti; Orchiston, Caroline; Elwood, Kenneth; Johnston, David; Becker, Julia (2021-03-01)

Seismic collapse safety of reinforced concrete moment resisting frames with/without beam-column joint detailing

Ahmad, Naveed; Rizwan, Muhammad; Ashraf, Muhammad; Khan, Akhtar Naeem; Ali, Qaisar (2021-03-01)

BRB system stability considering frame out-of-plane loading and deformation zone

MacRae, Gregory; Lee, Chin-Long; Vazquez-Colunga, Saul; Cui, Jian; Alizadeh, Saeid; Jia, Liang-Jiu (2021-03-01)

Basin effects and limitations of 1D site response analysis from 2D numerical models of the Thorndon basin

McGann, Christopher R; Bradley, Brendon; Wotherspoon, Liam; Lee, Robin (2021-03-01)

Bulletin of the New Zealand Society for Earthquake Engineering: Recent submissions

Comparison of nonlinear response of gravity cantilever retaining walls and mechanically stabilised earth (MSE) wall structures ﻿

Key drivers in using low damage seismic designs in Christchurch buildings ﻿

Highlighting the need for multiple loading protocols in bi-directional testing ﻿

A method for seismic design of RC frame buildings using fundamental mode and plastic rotation capacity ﻿

Seismic zonation and default suites of ground-motion records for time-history analysis in the South Island of New Zealand ﻿

System overstrength factor induced by interaction between structural reinforced concrete walls, floors and gravity frames: Analytical formulation ﻿

Shear wave velocities of prominent geologic formations in the Nelson-Tasman region ﻿

Hybrid posttensioned rocking (HPR) frame buildings: Low-damage vs low-loss paradox ﻿

Evidence collected for peer review of buckling-restrained braced frames in New Zealand ﻿

Recycling of damaged RC frames: Replacing crumbled concrete and installing steel haunches below/above the beam at connections ﻿

Design recommendations to prevent global out-of-plane instability of rectangular reinforced concrete ductile walls ﻿

Designing and detailing transverse reinforcement to control bar buckling in rectangular RC walls ﻿

Investigation of construction material quality and workmanship defects of RC buildings collapsed and severely damaged in the 6.8 Mw Sivrice, Elazığ, Turkey earthquake, January 2020 ﻿

Theoretical and experimental evaluation of timber-framed partitions under lateral drift ﻿

The oscillation resistance ratio (ORR) for understanding inelastic response ﻿

Seismic design of acceleration-sensitive non-structural elements in New Zealand: State-of-practice and recommended changes ﻿

To cordon or not to cordon: The inherent complexities of post-earthquake cordoning learned from Christchurch and Wellington experiences ﻿

Seismic collapse safety of reinforced concrete moment resisting frames with/without beam-column joint detailing ﻿

BRB system stability considering frame out-of-plane loading and deformation zone ﻿

Basin effects and limitations of 1D site response analysis from 2D numerical models of the Thorndon basin ﻿